3 DHCP Commands
dhcp client
Set the AutoDHCP client timeout in startup phase. Only applicable in AutoDHCP mode (See dhcp policy command).
SYNTAX:
dhcp client | timeout = <number> |
|
|
|
|
timeout | A number between 0 and 1814400 (seconds). | REQUIRED |
| Represents the time to look for another DHCP server. |
|
| Specifying `1` will make the timeout infinite: the SpeedToucht350i |
|
| will remain client. |
|
| By default the timeout is 20 seconds. |
|
EXAMPLE:
=>dhcp status
DHCP Server Status: Running Current configuration:
Address Range: 10.0.0.1 ... 10.255.255.254
.......
Start±up client parameters:
Timeout: 20 sec Tracing: off
Memory usage:
Leases: total: 36, in use: 7 free: 80 %
=>dhcp client timeout=15 =>dhcp status
DHCP Server Status: Running Current configuration:
Address Range: 10.0.0.1 ... 10.255.255.254
.......
Start±up client parameters:
Timeout: 15 sec Tracing: off
Memory usage:
Leases: total: 36, in use: 7 free: 80 %
=>
RELATED COMMANDS: |
|
dhcp policy | Set DHCP policy. |
dhcp start | Start DHCP server. |
dhcp status | Show current DHCP server configuration. |
dhcp stop | Stop DHCP server. |
3EC 16982 AGAA TCZZA Ed. 01 |
| 41 / 138 |
|
|
|