9 System Commands
system setpassword
Set/change the current SpeedToucht350i system password.
Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save the current configuration via the system save command.
To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended always to make sure that it is protected by a SpeedToucht350i system password and to change it regularly.
SYNTAX:
system setpassword | password = {<string>$_BOARD_SERIAL_NBR} |
| |
|
|
| |
password | the system password can be set to either: | REQUIRED | |
| G | <string> |
|
|
| A free to choose password <string> |
|
| G | $_BOARD_SERIAL_NBR |
|
|
| Equal to the SpeedToucht350i device serial number's nine |
|
|
| numerical digits. |
|
IMPORTANT NOTE: |
|
Serial number | The code serial number is printed on the marking label found on |
| the bottom of the SpeedToucht350i: |
Q A
CP992300XXX
Speed Touch Home NT Tested to Comply with |
| |||||
FC | FCC rules Part 15 and Part 68 | C R |
|
|
| US |
FOR HOME OR OFFICE USE |
|
|
| |||
|
|
| ||||
|
|
|
|
| ||
FCC ID: 6VUBEL±35680±DL±N | LISTED |
| ||||
REN:<0.1 |
| |||||
| Made in: Country | I . T . E . E168438 | ||||
MODEL NUMBER:
3EC 18204BC AA 01
PART OF A SYSTEM THAT IS COVERED IN WHOLE OR IN
PART BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,636,253.5,633,817.5,657,355.5,903,612.5,867,528 5,951,660.6,044,151.6,072,810.6,088,386.6,105,084
| Q A | |
CPYYWWNNNNN | MODEL NUMBER: | |
3EC 18704BC AA 01 | ||
|
Speed Touch Home POTS Network Terminator
It consists of the concatenation of the string 'CP' followed by nine digits. These nine digits incorporate the serial number.
In case the System password is set to the serial number, for authentication the serial number must be given without the preceding string 'CP' .
DO NOT REMOVE OR COVER THIS MARKING LABEL !!!
3EC 16982 AGAA TCZZA Ed. 01 |
| 129 / 138 |
|
|
|
