Cisco Systems WSC2960X48TDL Configuring Interface Characteristics, Finding Feature Information

C H A P T E R 2

Configuring Interface Characteristics

This module contains the following topics:

•Finding Feature Information, page 13

•Information About Configuring Interface Characteristics, page 13

•How to Configure Interface Characteristics, page 23

•Monitoring Interface Characteristics, page 34

•Configuration Examples for Interface Characteristics, page 36

•Additional References for the Interface Characteristics Feature, page 38

•Feature History and Information for Configuring Interface Characteristics, page 39

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Information About Configuring Interface Characteristics

Interface Types

This section describes the different types of interfaces supported by the switch. The rest of the chapter describes configuration procedures for physical interface characteristics.

Note The stack ports on the rear of the stacking-capable switches are not Ethernet ports and cannot be configured.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 13