Smeg SBC30 Maintenance, Components Substitution, Power Of Electrical Components, Denominations

MAINTENANCE

Before doing any action, disconnect the appliance from the input power.

7) COMPONENTS SUBSTITUTION

To replace the components lodged in the internal part, is necessary to take the appliance up from the furniture, overturn it, loosen the screws and take away the bottom.

After these actions is possible to work on the plates, commutators, clamps and input cable.

In case of substitution of the input cable, the installer must keep the "earth" conductor longer

than "live" ones, and must respect the cautions in paragraph "ELECTRICAL CONNECTION".

To reassemble the appliance repeat the inverse process.

8)TECHNICAL CHARACTERISTICS OF THE ELECTRICALCOMPONENTS

To facilitate the job of the installer we present a scheme with the characteristics of the components.

POWER OF ELECTRICAL COMPONENTS

Denominations				W
Radiant electric heating element Ø 145 mm				1200
Radiant electric heating element Ø 145 mm "Hi-light"				1200
Radiant electric heating element Ø 180 mm				1700
Radiant electric heating element Ø 180 mm "Hi-light"				1800
Radiant electric heating element double cooking zone conc. Ø 180/120 mm ("Hi-light" as well)				1700
Radiant electric heating element double cooking zone oval 265/170 mm				2200
Radiant electric heating element double cooking zone oval 265/170 mm "Hi-light"				2400
Radiant electric heating element grill				2200
TYPE AND SECTION OF THE POWER CABLES (for 4 HEATING ELEMENTS)
Cable type	Single phase power	Three phase power	Three phase power
	monofase	Trifase	Trifase
	230 - 240 V ~	400 – 415 V 3N ~	400 - 415 V 2N ~
Rubber	3 X 2.5 mm2 (*)	5 X 1.5 mm2 (*)	4 X 1.5 mm2 (*)
H05 RR-F

(*) keeping in mind the contemporaneousness factor

TYPE AND SECTION OF THE POWER CABLES (for 2 or 1 HEATING ELEMENTS)

Cable type	Single phase power
	230 - 240 V ~
Rubber	3 X 1.5 mm2 (*)
H05 RR-F

(*) keeping in mind the contemporaneousness factor

27