Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring Location TLV and Wired Location Service

 

Command or Action

Purpose

 

Example:

 

 

Switch# show location admin-tag

 

 

or

 

 

Switch# show location civic-location

 

 

identifier

 

 

or

 

 

Switch# show location elin-location

 

 

identifier

 

Step 8

copy running-config startup-config

(Optional) Saves your entries in the configuration file.

Example:

Switch# copy running-config startup-config

Enabling Wired Location Service on the Switch

Beginning in privileged EXEC mode, follow these steps to enable wired location service on the switch.

SUMMARY STEPS

1.configure terminal

2.nmsp enable

3.nmsp notification interval {attachment location} interval-seconds

4.end

5.show network-policy profile

6.copy running-config startup-config

DETAILED STEPS

 

Command or Action

Purpose

Step 1

configure terminal

Enters global configuration mode.

 

Example:

 

 

Switch# configure terminal

 

 

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

66

OL-29034-01

Page 78
Image 78
Cisco Systems WSC2960X48TDL manual Enabling Wired Location Service on the Switch, Command or Action Purpose Example