Using the
Configuration Logging
Table 2: Common CLI Error Messages
Error Message
Meaning | How to Get Help |
%Ambiguous command: "show con"
% Incomplete command.
%Invalid input detected at ‘^’ marker.
You did not enter enough characters for your switch to recognize the command.
You did not enter all the keywords or values required by this command.
You entered the command incorrectly. The caret (^) marks the point of the error.
Reenter the command followed by a question mark (?) with a space between the command and the question mark.
The possible keywords that you can enter with the command appear.
Reenter the command followed by a question mark (?) with a space between the command and the question mark.
The possible keywords that you can enter with the command appear.
Enter a question mark (?) to display all the commands that are available in this command mode.
The possible keywords that you can enter with the command appear.
Configuration Logging
You can log and view changes to the switch configuration. You can use the Configuration Change Logging and Notification feature to track changes on a
Note Only CLI or HTTP changes are logged.
How to Use the CLI to Configure Features
Configuring the Command History
The software provides a history or record of commands that you have entered. The command history feature is particularly useful for recalling long or complex commands or entries, including access lists. You can customize this feature to suit your needs.
Catalyst
5 |
