Cisco Systems WSC2960X48TDL Configuring the Console Media Type, shutdown, Shuts down an interface

Configuring Interface Characteristics

Configuring the Console Media Type

Command or Action Purpose

Example:

Switch(config)# interface gigabitethernet1/0/2

Step 3 shutdown Shuts down an interface.

Example:

Switch(config-if)# shutdown

Step 4 no shutdown Restarts an interface.

Example:

Switch(config-if)# no shutdown

Step 5 end Returns to privileged EXEC mode.

Example:

Switch(config-if)# end

Configuring the Console Media Type

Beginning in privileged EXEC mode, follow these steps to set the console media type to RJ-45. If you configure the console as RJ-45, USB console operation is disabled, and input comes only through the RJ-45 connector.

This configuration applies to all switches in a stack.

SUMMARY STEPS

1.configure terminal

2.line console 0

3.media-type rj45

4.end

	Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
32	OL-29034-01