Cisco Systems WSC2960X48TDL manual Configuring Location TLV and Wired Location Service

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring Location TLV and Wired Location Service

	Command or Action	Purpose
Step 7	lldp med-tlv-select network-policy	Specifies the network-policy TLV.

Example:

Switch(config-if)# lldp med-tlv-selectnetwork-policy

Step 8 end Returns to privileged EXEC mode.

Example:

Switch(config)# end

Step 9 show network-policy profile Verifies the configuration.

Example:

Switch# show network-policy profile

Step 10 copy running-config startup-config (Optional) Saves your entries in the configuration file.

Example:

Switch# copy running-config startup-config

Configuring Location TLV and Wired Location Service

Beginning in privileged EXEC mode, follow these steps to configure location information for an endpoint and to apply it to an interface.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 63