Cisco Systems WSC2960X48TDL Configuring SVI Autostate Exclude, Returns to privileged EXEC mode

Configuring Interface Characteristics

Configuring SVI Autostate Exclude

	Command or Action	Purpose
Step 4	end	Returns to privileged EXEC mode.

Example:

Switch(config-if)# end

Step 5 show interfaces interface-id Verifies the interface flow control settings.

Example:

Switch# show interfaces gigabitethernet1/0/1

Configuring SVI Autostate Exclude

SUMMARY STEPS

1.configure terminal

2.interface interface-id

3.switchport autostate exclude

4.end

5.show running config interface interface-id

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters global configuration mode.
	Example:
	Switch# configure terminal
Step 2	interface interface-id	Specifies a Layer 2 interface (physical port or port channel),
		and enter interface configuration mode.
	Example:
	Switch(config)# interface gigabitethernet1/0/2

	Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
30	OL-29034-01