Cisco Systems WSC2960X48TDL Configuring IEEE 802.3x Flow Control, show interfaces interface-id

Configuring Interface Characteristics

Configuring IEEE 802.3x Flow Control

	Command or Action	Purpose
	gigabitethernet1/0/3
Step 7	copy running-config startup-config	(Optional) Saves your entries in the configuration file.
	Example:
	Switch# copy running-config
	startup-config

Configuring IEEE 802.3x Flow Control

SUMMARY STEPS

1.configure terminal

2.interface interface-id

3.flowcontrol {receive} {on off desired}

4.end

5.show interfaces interface-id

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure terminal	Enters global configuration mode

Example:

Switch# configure terminal

Step 2	interface interface-id	Specifies the physical interface to be configured, and
		enter interface configuration mode.
	Example:
	Switch(config)# interface gigabitethernet1/0/1
Step 3	flowcontrol {receive} {on off desired}	Configures the flow control mode for the port.
	Example:
	Switch(config-if)#flowcontrol receive on

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 29