Cisco Systems WSC2960X48TDL manual Power inline police action log-Generates a syslog message

Configuring PoE

Configuring Power Policing

	Command or Action	Purpose
		• power inline police action log—Generates a syslog message
		while still providing power to the port.
		If you do not enter the action log keywords, the default action shuts
		down the port and puts the port in the error-disabled state.
Step 4	exit	Returns to global configuration mode.

Example:

Switch(config-if)# exit

Step 5 Use one of the following:

•errdisable detect cause inline-power

•errdisable recovery cause inline-power

•errdisable recovery interval interval

Example:

Switch(config)# errdisable detect cause inline-power

Switch(config)# errdisable recovery cause inline-power

Switch(config)# errdisable recovery interval 100

(Optional) Enables error recovery from the PoE error-disabled state, and configures the PoE recover mechanism variables.

By default, the recovery interval is 300 seconds.

For interval interval, specifies the time in seconds to recover from the error-disabled state. The range is 30 to 86400.

Step 6	exit	Returns to privileged EXEC mode.
	Example:
	Switch(config)# exit
Step 7	Use one of the following:	Displays the power monitoring status, and verify the error recovery
		settings.

•show power inline police

•show errdisable recovery

Example:

Switch# show power inline police

Switch# show errdisable recovery

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 87