Mitsubishi Electronics MR-J2S- CL specifications Lmp, Parameter error

5. PARAMETERS

Class No.

46

47

48

49

parameters 1
Expansion	51
	50

52

53

Symbol		Name and Function				Initial	Unit		Setting
						value				range
*LMP	Software limit					0	10STM			999999
	Used to set the address increment side software stroke limit. The software limit						m				to
	is made invalid if this value is the same as in "software limit				".			999999
	(Refer to Section 5.2.7)
	Set the same sign to parameters No.46 and 47. Setting of different signs will
	result in a parameter error.
		Set address:
		Upper 3	Lower 3
		digits	digits
			Parameter No. 47
			Parameter No. 46
*LMN	Software limit					0	10STM				999999
	Used to set the address decrement side software stroke limit. The software limit						m				to
	is made invalid if this value is the same as in "software limit			".				999999
	(Refer to Section 5.2.7)
	Set the same sign to parameters No.48 and 49. Setting of different signs will
	result in a parameter error.
		Set address:
		Upper 3 Lower 3
		digits	digits
			Parameter No. 49
			Parameter No. 48
*LPP	Position range output address					0	10STM				999999
	Used to set the address increment side position range output address. Set the						m				to
	same sign to parameters No.50 and 51. Setting of different signs will result in a							999999
	parameter error.
	In parameters No. 50 to 53, set the range where position range (POT) turns on.
		Set address:
		Upper 3	Lower 3
		digits	digits
			Parameter No. 51
			Parameter No. 50
*LNP	Position range output address					0	10STM				999999
	Used to set the address decrement side position range output address. Set the						m				to
	same sign to parameters No.52 and 53. Setting of different signs will result in a							999999
	parameter error.
		Set address:
		Upper 3	Lower 3
		digits	digits
			Parameter No. 53
			Parameter No. 52

5 - 14