3.SIGNALS AND WIRING

3.SIGNALS AND WIRING

Any person who is involved in wiring should be fully competent to do the work. Before starting wiring, switch power off, then wait for more than 10 minutes, and after the charge lamp has gone off, make sure that the voltage is safe in the tester or like. Otherwise, you may get an electric shock.

WARNING Ground the servo amplifier and the servo motor securely.

Do not attempt to wire the servo amplifier and servo motor until they have been installed. Otherwise, you may get an electric shock.

The cables should not be damaged, stressed excessively, loaded heavily, or pinched. Otherwise, you may get an electric shock.

Wire the equipment correctly and securely. Otherwise, the servo motor may misoperate, resulting in injury.

Connect cables to correct terminals to prevent a burst, fault, etc.

Ensure that polarity (, ) is correct. Otherwise, a burst, damage, etc. may occur. The surge absorbing diode installed to the DC relay designed for control output should be fitted in the specified direction. Otherwise, the signal is not output due to a fault, disabling the forced stop (EMG) and other protective circuits.

CAUTION

Servo

 

 

 

amplifier

 

Servo amplifier

 

COM

 

COM

 

 

(24VDC)

 

(24VDC)

 

 

Control

 

Control output

 

output

RA

RA

signal

signal

 

 

Use a noise filter, etc. to minimize the influence of electromagnetic interference, which may be given to electronic equipment used near the servo amplifier.

Do not install a power capacitor, surge suppressor or radio noise filter (FR-BIF option) with the power line of the servo motor.

When using the regenerative brake resistor, switch power off with the alarm signal. Otherwise, a transistor fault or the like may overheat the regenerative brake resistor, causing a fire.

Do not modify the equipment.

POINT

CN1A, CN1B, CN2 and CN3 have the same shape. Wrong connection of the connectors will lead to a failure. Connect them correctly.

3 - 1

Page 47 Page 49
Page 48
Image 48
Mitsubishi Electronics MR-J2S- CL specifications Signals and Wiring
Page 47 Page 49

MR-J2S- CL specifications

Mitsubishi Electronics has long been a pioneer in automation and control technology, and one of its prominent offerings is the MR-J2S-CL servo amplifier. Designed to enhance the performance of servo motors, the MR-J2S-CL is a critical component in various applications, ranging from industrial machinery to robotics.

One of the standout features of the MR-J2S-CL is its high-performance control capabilities. This servo amplifier supports both position and speed control, enabling precise movement and responsiveness in dynamic applications. The MR-J2S-CL boasts a sophisticated control algorithm that ensures superior torque response, making it ideal for applications that require quick and accurate motion control.

The MR-J2S-CL employs advanced features such as the Auto-Tuning function, which automatically adjusts the servo settings to optimize performance for the specific load conditions. This automation simplifies setup processes and reduces downtime, allowing users to quickly configure the system to their needs.

In terms of connectivity, the MR-J2S-CL is equipped with various communication options, including the CC-Link and Mitsubishi's own MELSEC communications. These options facilitate seamless integration with other devices and control systems, enhancing the overall interoperability of factory automation setups.

Another critical aspect of the MR-J2S-CL is its built-in safety features. The amplifier includes functionalities like safe torque off (STO) and overcurrent protection, which contribute to the overall safety of the operation. These safety measures are essential in reducing the risk of accidents in environments where human interaction occurs alongside machinery.

The MR-J2S-CL is designed with durability and reliability in mind. It has a robust construction that is capable of withstanding harsh industrial environments, including high temperatures and dust exposure. This resilience ensures a long service life, reducing maintenance needs and operational costs.

Furthermore, the MR-J2S-CL is compatible with a wide range of Mitsubishi servo motors, making it a versatile choice for various applications. Its comprehensive capabilities, combined with user-friendly interface options, allow for easy programming and monitoring of performance.

In summary, the Mitsubishi Electronics MR-J2S-CL servo amplifier stands out for its high-performance control, advanced safety features, and robust design. It effectively meets the demands of various industrial applications, making it a valuable asset in modern automation and manufacturing environments. With its blend of precision, reliability, and flexibility, the MR-J2S-CL continues to be a preferred choice for engineers and manufacturers alike.
Top Page Image Contents