Mitsubishi Electronics MR-J2S- CL Motor-lessoperation POINT, 1Execution of motor-lessoperation a

6. SERVO CONFIGURATION SOFTWARE

6.7.3 Motor-less operation

POINT

When this operation is used in an absolute position detection system, the home position cannot be restored properly unless the encoder is connected properly.

Without a servo motor being connected, the output signals are provided and the servo amplifier display shows the status as if a servo motor is actually running in response to the external I/O signals.

The sequence of the host programmable controller (PC) can be checked without connection of a servo motor.

Click “Test” on the menu bar and click “Operation w/o Motor” on the menu.

When the above choices are made, the following window appears:

a) b)

(1)Execution of motor-less operation ( a) )

Click “Start” to perform motor-less operation.

(2)Termination of motor-less operation ( b) )

Click “Close” to close the window.

(3)Cancel of motor-less operation

To cancel motor-less operation, switch off the power of the servo amplifier.

6 - 19