Mitsubishi Electronics MR-J2S- CL Positioning operation POINT, Servo Configuration Software

6. SERVO CONFIGURATION SOFTWARE

6.7.2 Positioning operation

POINT

In the positioning operation mode, do not rewrite data from the point table list screen or the servo amplifier's front panel. Otherwise, the set values are made invalid.

Click the “Forward” or “Reverse” button to start and rotate the servo motor by the preset moving distance

and then stop.

Click “Test” on the menu bar and click “Positioning” on the menu.

When the above choices are made, the following window appears:

a)

b)

c)

d)

e)

f)

g)

6 - 17