Mitsubishi Electronics MR-J2S- CL 1.4Model code definition 1 Rating plate, Mitsubishi

1. FUNCTIONS AND CONFIGURATION

Function		Description	Reference
Analog monitor	The servo status is output in terms of voltage in real time.		Section 5.2.4
Alarm history	By using the Servo configuration Software, the current alarm and		Section 6.8
	five past alarm numbers are stored and displayed.
I/O signal selection (Device setting)	By using the Servo configuration Software, any devices can be		Section 6.6
	assigned to 9 input, 5 output and 1 I/O pins.
	Servo motor-torque is limited.
Torque limit	Parameter	2 limit value	Section 3.2.5
	Analog input	1 limit value
	The servo motor speed is limited by analog input.
Override (speed limit)	The ratio of override to the set speed can be changed between 0 to		Section 3.2.4
	200%.
Status display	The servo status is displayed.		Section 7.2
Test operation mode	Jog, Positioning, Operation w/o motor, Forced output, Program		Section 6.7
	test
Limit switch	The servo motor travel region can be limited using the forward		Section 5.2.5
	rotation stroke end (LSP)/reverse rotation stroke end (LSN).
	The travel region is limited using parameters in terms of address.
Software limit	The function similar to that of a limit switch is limited by		Section 5.2.9
	parameter.

1.4Model code definition

(1) Rating plate

MITSUBISHI
						AC SERVO		Model
MODEL			MR-J2S-60CL					Capacity
		POWER : 600W
	POWERINPUT		: 3.2A 3PH 1PH200-230V 50Hz					Applicable power supply
				3PH 1PH200-230V 60Hz
				5.5A 1PH 230V 50/60Hz				Rated output current
		OUTPUT :		170V 0-360Hz 3.6A
		SERIAL	:	A5				Serial number
				TC3	AAAAG52		PASSED

MITSUBISHI ELECTRIC CORPORATION

MADE IN JAPAN

1 - 12