Mitsubishi Electronics MR-J2S- CL specifications Parameter mode POINT, Parameter mode transition

7. DISPLAY AND OPERATION

7.5 Parameter mode

POINT

To use the expansion parameters, change the parameter No. 19 (parameter block) value. (Refer to Section 5.1.1)

7.5.1 Parameter mode transition

After choosing the corresponding parameter mode with the "MODE" button, pressing the "UP" or "DOWN" button changes the display as shown below.

To status display mode

MODE

Basic parameters	Expansion parameters 1	Expansion parameters 2	Special parameters
Parameter No. 0	Parameter No. 20	Parameter No. 54	Parameter No. 78
Parameter No. 1	Parameter No. 21	Parameter No. 55	Parameter No. 79
			UP

DOWN

Parameter No. 18	Parameter No. 52	Parameter No. 76	Parameter No. 89
Parameter No. 19	Parameter No. 53	Parameter No. 77	Parameter No. 90

The parameter whose abbreviation is marked * is made valid by switching power off, then on after changing its setting. (Refer to Section 5.1.2)

7 - 11