Chapter 7 Wireless LAN

7.11.2 Security Mode: WPA2-PSK

Use this screen to configure the WPA2-PSKsecurity for your NBG-460N when it is in AP+Bridge or Bridge Only mode.

Figure 87 Network > Wireless LAN > WDS (WPA2-PSK)

The following table describes the labels in this screen. Refer to Table 41 on page 118 for descriptions of other fields in this screen.

Table 43 Network > Wireless LAN > WDS (WPA2-PSK)

LABEL

DESCRIPTION

Pre-Shared Key

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters

 

(including spaces and symbols).

 

 

7.12 Technical Reference

The following section contains additional technical information about the NBG- 460N features described in this chapter.

7.12.1 Roaming

A wireless station is a device with an IEEE 802.11a/b/g/n compliant wireless interface. An access point (AP) acts as a bridge between the wireless and wired networks. An AP creates its own wireless coverage area. A wireless station can associate with a particular access point only if it is within the access point’s coverage area.

In a network environment with multiple access points, wireless stations are able to switch from one access point to another as they move between the coverage areas. This is known as roaming. As the wireless station moves from place to place, it is responsible for choosing the most appropriate access point depending on the signal strength, network utilization or other factors.

NBG-460N User’s Guide

121

Page 121
Image 121
ZyXEL Communications wireless n gigbit router zyxel manual Technical Reference, Security Mode WPA2-PSK, Roaming, 121