ZyXEL Communications wireless n gigbit router zyxel manual Tutorial Property

Chapter 5 Tutorials

2Select the Active checkbox to enable the VPN rule after it has been created. Make sure IKE is selected as the IPSec Keying Mode.

Figure 55 Tutorial: Property

3Enter the IP address “10.0.0.7” in the Local Address text box. This is the IP address of Jack’s computer. Enter the IP address “10.0.0.7” in the Local Address End/Mask text box. This value is the same as Jack only wants Bob to access this single IP address.

Figure 56 Tutorial: Local Policy

4Enter the IP address “192.168.1.35” in the Remote Address Start text box. This is the IP address of Jack’s computer. Enter the IP address “192.168.1.35” in the Remote Address End/Mask text box. This value is the same as Bob only wants Jack to access this single IP address.

Figure 57 Tutorial: Remote Policy

5Enter the IP address “2.2.2.2” in the My IP Address text box. This is Jack’s WAN IP address.

6Select IP as the Local ID Type. This is the type of content that will be used to identify Jack’s NBG-460N. Enter the IP address “2.2.2.2” in the Local Content text box. This identifies Jack’s NBG-460N to Bob’s NBG-460N.

7Enter the IP address “1.1.1.1” in the Secure Gateway Address text box. This is Bob’s WAN IP address.

80

NBG-460N User’s Guide