ZyXEL Communications wireless n gigbit router zyxel Advanced Configuration, 238, Wlan Bandwidth

Chapter 17 Bandwidth Management

Table 76 Management > Bandwidth MGMT > General

LABEL	DESCRIPTION
WAN Bandwidth	Enter the amount of bandwidth in Mbps (2 to 100) that you want to
	allocate for WAN traffic.
	The recommendation is to set this speed to be equal to or less than
	the speed of the broadband device connected to the WAN port. For
	example, set the speed to 10 Mbps (or less) if the broadband device
	connected to the WAN port has an upstream speed of 10 Mbps.
WLAN Bandwidth	Enter the amount of bandwidth in Mbps (2 to 100,000) that you want
	to allocate for WLAN traffic.
	The recommendation is to set this speed to be less than or equal to 54
	Mbps.
Apply	Click Apply to save your customized settings.
Reset	Click Reset to begin configuring this screen afresh.

17.5 Advanced Configuration

Use this screen to configure bandwidth management rules for the pre-defined services or applications.

You can also use this screen to configure bandwidth management rule for other services or applications that are not on the pre-defined list of NBG-460N. Additionally, you can define the source and destination IP addresses and port for a service or application.

The two tables shown in this screen can be configured and applied at the same time.

238

NBG-460N User’s Guide