ZyXEL Communications wireless n gigbit router zyxel manual 302, Firewall or bandwidth management

Chapter 24 Sys Op Mode

•The DHCP server on your device is disabled. In AP mode there must be a device with a DHCP server on your network such as a router or gateway which can allocate IP addresses.

The IP address of the device on the local network is set to 192.168.1.1.

The following table describes the labels in the General screen.

Table 117 Maintenance > Sys OP Mode > General

LABEL

DESCRIPTION

System Operation Mode

Router	Select Router if your device routes traffic between a local network and
	another network such as the Internet. This mode offers services such as a
	firewall or bandwidth management.
Access Point	Select Access Point if your device bridges traffic between clients on the
	same network.
Apply	Click Apply to save your settings.
Reset	Click Reset to return your settings to the default (Router)

Note: If you select the incorrect System Operation Mode you can lose your connection to the Internet.

302

NBG-460N User’s Guide