ZyXEL Communications wireless n gigbit router zyxel manual IP Static Route Screen, 232

Chapter 16 Static Route

•Use the Static Route Setup screen (Section 16.3.1 on page 233) to add or edit a static route rule.

16.3IP Static Route Screen

Use this screen to view existing static route rules. Click Management > Static Route to open the IP Static Route screen. The following screen displays.

Figure 144 Management > Static Route > IP Static Route

The following table describes the labels in this screen.

Table 74 Management > Static Route > IP Static Route

LABEL	DESCRIPTION
#	This is the index number of an individual static route. The first entry is
	for the default route and not editable.
Name	This is the name that describes or identifies this route.
Active	This icon is turned on when this static route is active.
	Click the Edit icon under Modify and select the Active checkbox in the
	Static Route Setup screen to enable the static route. Clear the
	checkbox to disable this static route without having to delete the entry.
Destination	This parameter specifies the IP network address of the final destination.
	Routing is always based on network number.
Gateway	This is the IP address of the gateway. The gateway is an immediate
	neighbor of your NBG-460N that will forward the packet to the
	destination. On the LAN, the gateway must be a router on the same
	segment as your NBG-460N; over the WAN, the gateway must be the
	IP address of one of the remote nodes.
Modify	Click the Edit icon to open the static route setup screen. Modify a static
	route or create a new static route in the Static Route Setup screen.
	Click the Remove icon to delete a static route.

232

NBG-460N User’s Guide