ZyXEL Communications wireless n gigbit router zyxel manual 283

	Chapter 21 Logs
Table 104 IKE Logs (continued)
LOG MESSAGE	DESCRIPTION
XAUTH fail! Username:	The router was not able to use extended
<Username>	authentication to authenticate the listed username.
Rule[%d] Phase 1 negotiation	The listed rule’s IKE phase 1 negotiation mode did not
mode mismatch	match between the router and the peer.
Rule [%d] Phase 1 encryption	The listed rule’s IKE phase 1 encryption algorithm did
algorithm mismatch	not match between the router and the peer.
Rule [%d] Phase 1	The listed rule’s IKE phase 1 authentication algorithm
authentication algorithm	did not match between the router and the peer.
mismatch
Rule [%d] Phase 1	The listed rule’s IKE phase 1 authentication method
authentication method	did not match between the router and the peer.
mismatch
Rule [%d] Phase 1 key group	The listed rule’s IKE phase 1 key group did not match
mismatch	between the router and the peer.
Rule [%d] Phase 2 protocol	The listed rule’s IKE phase 2 protocol did not match
mismatch	between the router and the peer.
Rule [%d] Phase 2 encryption	The listed rule’s IKE phase 2 encryption algorithm did
algorithm mismatch	not match between the router and the peer.
Rule [%d] Phase 2	The listed rule’s IKE phase 2 authentication algorithm
authentication algorithm	did not match between the router and the peer.
mismatch
Rule [%d] Phase 2	The listed rule’s IKE phase 2 encapsulation did not
encapsulation mismatch	match between the router and the peer.
Rule [%d]> Phase 2 pfs	The listed rule’s IKE phase 2 perfect forward secret
mismatch	(pfs) setting did not match between the router and
	the peer.
Rule [%d] Phase 1 ID mismatch	The listed rule’s IKE phase 1 ID did not match
	between the router and the peer.
Rule [%d] Phase 1 hash	The listed rule’s IKE phase 1 hash did not match
mismatch	between the router and the peer.
Rule [%d] Phase 1 preshared	The listed rule’s IKE phase 1 pre-shared key did not
key mismatch	match between the router and the peer.
Rule [%d] Tunnel built	The listed rule’s IPSec tunnel has been built
successfully	successfully.
Rule [%d] Peer's public key	The listed rule’s IKE phase 1 peer’s public key was not
not found	found.
Rule [%d] Verify peer's	The listed rule’s IKE phase 1verification of the peer’s
signature failed	signature failed.
Rule [%d] Sending IKE	IKE sent an IKE request for the listed rule.
request
Rule [%d] Receiving IKE	IKE received an IKE request for the listed rule.
request
Swap rule to rule [%d]	The router changed to using the listed rule.
Rule [%d] Phase 1 key length	The listed rule’s IKE phase 1 key length (with the AES
mismatch	encryption algorithm) did not match between the
	router and the peer.

NBG-460N User’s Guide

283