ZyXEL Communications wireless n gigbit router zyxel manual Summary Any IP Table, Logs View Log

		Chapter 3 Introducing the Web Configurator
Table 5 Screens Summary
LINK	TAB	FUNCTION
Logs	View Log	Use this screen to view the logs for the categories that you
		selected.
	Log	Use this screen to change your NBG-460N’s log settings.
	Settings
Tools	Firmware	Use this screen to upload firmware to your NBG-460N.
	Configuratio	Use this screen to backup and restore the configuration or
	n	reset the factory defaults to your NBG-460N.
	Restart	This screen allows you to reboot the NBG-460N without
		turning the power off.
	Wake On	Use this screen to remotely turn on a device on the
	LAN	network.
	Green	Use this screen to activate the energy-conserving
		feature of your NBG-460N
Config	General	This screen allows you to display or hide the advanced
Mode		screens or features.
Sys OP	General	This screen allows you to select whether your device acts
Mode		as a Router or a Access Point.
Language	Language	This screen allows you to select the language you prefer.

3.5.2 Summary: Any IP Table

This screen displays the IP address of each computer that is using the NBG-460N via the any IP feature. Any IP allows computers to access the Internet through the NBG-460N without changing their network settings when NAT is enabled. To access this screen, open the Status screen (see Section 3.5 on page 38), and click (Details...) next to Any IP Table.

Figure 13 Any IP Table

3.5.3 Summary: Bandwidth Management Monitor

Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over the bandwidth budget for each rule. The gray section of the

NBG-460N User’s Guide

43