ZyXEL Communications wireless n gigbit router zyxel manual 167, Wake On LAN is enabled

	Chapter 11 Network Address Translation (NAT)
Table 59 Network > NAT > Application
LABEL	DESCRIPTION
Service Name	Type a name (of up to 31 printable characters) to identify this rule in
	the first field next to Service Name. Otherwise, select a predefined
	service in the second field next to Service Name. The predefined
	service name and port number(s) will display in the Service Name and
	Port fields.
Port	Type a port number(s) to be forwarded.
	To specify a range of ports, enter a hyphen (-) between the first port
	and the last port, such as 10-20.
	To specify two or more non-consecutive port numbers, separate them
	by a comma without spaces, such as 123,567.
Server IP	Type the inside IP address of the server that receives packets from the
Address	port(s) specified in the Port field.
Server Port	This should match the value in the Port field.
	Type the inside port number of the server that receives packets from
	the port(s) specified in the Port field.
Wake up this	Select this to use WoL (Wake On LAN) to turn on the server specified in
target by Wake	the IP address field when packets are received on the ports specified
On LAN	in the Port field.
	Note: For more information on Wake On LAN see Section 22.6 on
	page 295.
Apply	Click Apply to save your changes to the Application Rules Summary
	table.
Reset	Click Reset to not save and return your new changes in the Service
	Name and Port fields to the previous one.
Application Rules Summary
#	This is the number of an individual port forwarding server entry.
Active	This icon is turned on when the rule is enabled.
Name	This field displays a name to identify this rule.
Port	This field displays the port number(s) used by the service or
	application.
Server IP	This field displays the inside IP address of the server.
Address
Server Port	This is the inside port number of the server that receives packets from
	the port(s) specified in the Port field.
Wake On LAN	This field displays No when Wake On LAN is disabled and Yes when
	Wake On LAN is enabled.
Modify	Click the Edit icon to display and modify an existing rule setting in the
	fields under Add Application Rule.
	Click the Remove icon to delete a rule.

NBG-460N User’s Guide

167