ZyXEL Communications wireless n gigbit router zyxel manual 237, Management check box, Mbps

Chapter 17 Bandwidth Management

Click Management > Bandwidth MGMT to open the bandwidth management

General screen.

Figure 147 Management > Bandwidth MGMT > General

The following table describes the labels in this screen.

Table 76 Management > Bandwidth MGMT > General

LABEL	DESCRIPTION
Enable	Select this to have the NBG-460N apply bandwidth management.
Bandwidth	Enable bandwidth management to give traffic that matches a
Management
	bandwidth rule priority over traffic that does not match a bandwidth
	rule.
	Enabling bandwidth management also allows you to control the
	maximum or minimum amounts of bandwidth that can be used by
	traffic that matches a bandwidth rule.
Enable Automatic	This field is only applicable when you select the Enable Bandwidth
Traffic Classifier	Management check box.
	Select this to have the NBG-460N apply bandwidth management
	based on the default bandwidth classes. This applies to Real-time
	packets, such as VoIP traffic, which always get higher priority.
Management	Enter the allowed bandwidth for the LAN, WAN or WLAN interface
Bandwidth	fields below to enhance the throughput of upstream traffic.
LAN Bandwidth	Enter the amount of bandwidth in Mbps (2 to 100) that you want to
	allocate for LAN traffic.
	The recommendation is to set this speed to less than or equal to 100
	Mbps.

NBG-460N User’s Guide

237