ZyXEL Communications wireless n gigbit router zyxel Configuring Jack’s NBG-460N VPN Settings

Chapter 5 Tutorials

7Enter the IP address “2.2.2.2” in the Secure Gateway Address text box. This is Jack’s WAN IP address.

8Select IP as the Peer ID Type. This is Jack’s Local ID Type. Enter “2.2.2.2” in the Peer Content text box. This is Jack’s Local Content WAN IP address.

Figure 52 Tutorial: Authentication Method

9Select Tunnel as the Encapsulation Mode and ESP as the IPSec Protocol.

10Enter “ThisIsMySecretKey” as the Pre-Shared Key. This is the password for the VPN tunnel that only Bob and Jack know.

11Select 3DES as the encyption algorithm. Select the authentication algorithm as SHA1. These algorithms are more secure.

Figure 53 Tutorial: IPSec Algorithm

12Click Apply to save the new rule and click VPN to return to the VPN Summary screen. The new VPN rule is displayed as shown below.

Figure 54 Tutorial: VPN Summary

5.3.2Configuring Jack’s NBG-460N VPN Settings

To configure these settings Jack uses the NBG-460N Web Configurator.

1Log into the NBG-460N Web Configurator and click VPN > Modify icon. This displays the VPN Rule Setup (basic) screen.

NBG-460N User’s Guide

79