ZyXEL Communications wireless n gigbit router zyxel 286, ACL Setting Notes, Type Code Description

Chapter 21 Logs

Table 106 802.1X Logs (continued)

LOG MESSAGE	DESCRIPTION
Local User Database does not	A user tried to use an authentication method that
support authentication method.	the local user database does not support (it only
	supports EAP-MD5).
No response from RADIUS. Pls	There is no response message from the RADIUS
check RADIUS Server.	server, please check the RADIUS server.
Use Local User Database to	The local user database is operating as the
authenticate user.	authentication server.
Use RADIUS to authenticate user.	The RADIUS server is operating as the
	authentication server.
No Server to authenticate user.	There is no authentication server to authenticate
	a user.
Local User Database does not	A user was not authenticated by the local user
find user`s credential.	database because the user is not listed in the
	local user database.

Table 107 ACL Setting Notes

PACKET	DIRECTION	DESCRIPTION
DIRECTION
(L to W)	LAN to WAN	ACL set for packets traveling from the LAN to the
		WAN.
(W to L)	WAN to LAN	ACL set for packets traveling from the WAN to the
		LAN.
(L to L/P)	LAN to LAN/	ACL set for packets traveling from the LAN to the
	NBG-460N	LAN or the NBG-460N.
(W to W/P)	WAN to WAN/	ACL set for packets traveling from the WAN to the
	NBG-460N	WAN or the NBG-460N.

Table 108 ICMP Notes

TYPE	CODE	DESCRIPTION
0		Echo Reply
	0	Echo reply message
3		Destination Unreachable
	0	Net unreachable
	1	Host unreachable
	2	Protocol unreachable
	3	Port unreachable
	4	A packet that needed fragmentation was dropped because it was set
		to Don't Fragment (DF)
	5	Source route failed
4		Source Quench

286

NBG-460N User’s Guide