ZyXEL Communications wireless n gigbit router zyxel manual Security Mode Static WEP, 119

Chapter 7 Wireless LAN

Table 41 Network > Wireless LAN > WDS (No Security)

LABEL	DESCRIPTION
Security Mode	Note: WDS security is independent of the security settings
	between the NBG-460N and any wireless clients.
	The WDS is set to No Security by default.
	• Refer to Section 7.11.1 on page 119 to view the screen for Static
	WEP security.
	• Refer to Section 7.11.2 on page 121 to view the screen for WPA2-
	PSK security.
Apply	Click Apply to save your changes to NBG-460N.
Refresh	Click Refresh to reload the previous configuration for this screen.

7.11.1 Security Mode: Static WEP

Use this screen to configure the Static WEP security for your NBG-460N when it is in AP+Bridge or Bridge Only mode.

Figure 86 Network > Wireless LAN > WDS (Static WEP)

NBG-460N User’s Guide

119