ZyXEL Communications wireless n gigbit router zyxel manual 309

Chapter 26 Troubleshooting

2Make sure you entered your ISP account information correctly in the wizard. These fields are case-sensitive, so make sure [Caps Lock] is not on.

3If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the AP.

•Go to Network > Wireless LAN > WDS and check if the NBG-460N is set to bridge mode. Select Disable and try to connect to the Internet again.

4Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again.

5Go to Maintenance > Sys OP Mode. Check your System Operation Mode setting.

•Select Router if your device routes traffic between a local network and another network such as the Internet.

•Select Access Point if your device bridges traffic between clients on the same network.

6If the problem continues, contact your ISP.

I cannot access the Internet anymore. I had access to the Internet (with the NBG- 460N), but my Internet connection is not available anymore.

1Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide and Section 1.6 on page 30.

2Reboot the NBG-460N.

3If the problem continues, contact your ISP.

The Internet connection is slow or intermittent.

1There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.6 on page 30. If the NBG-460N is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications.

2Check the signal strength. If the signal strength is low, try moving the NBG-460N closer to the AP if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on).

NBG-460N User’s Guide

309