ZyXEL Communications wireless n gigbit router zyxel manual 278, Icmp Logs

Chapter 21 Logs

Table 97 ICMP Logs (continued)

LOG MESSAGE	DESCRIPTION
Triangle route packet forwarded:	The firewall allowed a triangle route session to
ICMP	pass through.
Packet without a NAT table entry	The router blocked a packet that didn’t have a
blocked: ICMP	corresponding NAT table entry.
Unsupported/out-of-order ICMP:	The firewall does not support this kind of ICMP
ICMP	packets or the ICMP packets are out of order.
Router reply ICMP packet: ICMP	The router sent an ICMP reply packet to the
	sender.

Table 98 CDR Logs

LOG MESSAGE	DESCRIPTION
board%d line%d channel%d,	The router received the setup requirements for a call.
call%d,%s C01 Outgoing Call	“call” is the reference (count) number of the call.
dev=%x ch=%x%s	“dev” is the device type (3 is for dial-up, 6 is for
	PPPoE, 10 is for PPTP). "channel" or “ch” is the call
	channel ID.For example,"board 0 line 0 channel 0,
	call 3, C01 Outgoing Call dev=6 ch=0 "Means the
	router has dialed to the PPPoE server 3 times.
board%d line%d channel%d,	The PPPoE, PPTP or dial-up call is connected.
call%d,%s C02 OutCall
Connected%d%s
board%d line%d channel%d,	The PPPoE, PPTP or dial-up call was disconnected.
call%d,%s C02 Call
Terminated

Table 99 PPP Logs

LOG MESSAGE	DESCRIPTION
ppp:LCP Starting	The PPP connection’s Link Control Protocol stage has started.
ppp:LCP Opening	The PPP connection’s Link Control Protocol stage is opening.
ppp:CHAP Opening	The PPP connection’s Challenge Handshake Authentication Protocol
	stage is opening.
ppp:IPCP	The PPP connection’s Internet Protocol Control Protocol stage is
Starting	starting.
ppp:IPCP Opening	The PPP connection’s Internet Protocol Control Protocol stage is
	opening.
ppp:LCP Closing	The PPP connection’s Link Control Protocol stage is closing.
ppp:IPCP Closing	The PPP connection’s Internet Protocol Control Protocol stage is
	closing.

278

NBG-460N User’s Guide