ZyXEL Communications wireless n gigbit router zyxel manual Configuring Bob’s NBG-460N VPN Settings

Chapter 5 Tutorials

5.3.1 Configuring Bob’s NBG-460N VPN Settings

To configure these settings Bob uses the NBG-460N Web Configurator.

1Log into the NBG-460N Web Configurator and click VPN > Modify icon. This displays the VPN Rule Setup (basic) screen.

2Select the Active checkbox to enable the VPN rule after it has been created. Make sure IKE is selected as the IPSec Keying Mode.

Figure 49 Tutorial: Property

3Enter the IP address “192.168.1.35” in the Local Address text box. This is the IP address of Bob’s computer. Enter the IP address “192.168.1.35” in the Local Address End/Mask text box. This value is the same as Bob only wants Jack to access this single IP address.

Figure 50 Tutorial: Local Policy

4Enter the IP address “10.0.0.7” in the Remote Address Start text box. This is the IP address of Jack’s computer. Enter the IP address “10.0.0.7” in the Remote Address End/Mask text box. This value is the same as Jack only wants Bob to access this single IP address.

Figure 51 Tutorial: Remote Policy

5Enter the IP address “1.1.1.1” in the My IP Address text box. This is Bob’s WAN IP address.

6Select IP as the Local ID Type. This is the type of content that will be used to identify Bob’s NBG-460N. Enter the IP address “1.1.1.1” in the Local Content text box. This identifies Bob’s NBG-460N to Jack’s NBG-460N.

78

NBG-460N User’s Guide