ZyXEL Communications wireless n gigbit router zyxel Remote Management Limitations, System Timeout

Chapter 18 Remote Management

18.3 What You Need To Know

You may only have one remote management session running at a time. The NBG- 460N automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.

1.Telnet

2.HTTP

Note: To disable remote management of a service, select Disable in the corresponding Server Access field.

18.3.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1You have disabled that service in one of the remote management screens.

2The IP address in the Secured Client IP Address field does not match the client IP address. If it does not match, the NBG-460N will disconnect the session immediately.

3There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.

4There is a firewall rule that blocks it.

18.3.2 Remote Management and NAT

When NAT is enabled:

•Use the NBG-460N’s WAN IP address when configuring from the WAN.

•Use the NBG-460N’s LAN IP address when configuring from the LAN.

18.3.3System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). The NBG-460N automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen

248

NBG-460N User’s Guide