ZyXEL Communications wireless n gigbit router zyxel manual 241

Chapter 17 Bandwidth Management

The following table describes the labels in this screen.

Table 78 Bandwidth Management Rule Configuration: Pre-defined Service

LABEL	DESCRIPTION
#	This is the number of an individual bandwidth management rule.
Enable	Select an interface’s check box to enable bandwidth management on
	that interface.
Direction	These read-only labels represent the physical interfaces. Bandwidth
	management applies to all traffic flowing out of the router through the
	interface, regardless of the traffic’s source.
	Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass
	through the NBG-460N and be managed by bandwidth management.
Destination Port	This is the port number of the destination. See Appendix E on page 369
	for some common services and port numbers.
Source Port	This is the port number of the source. See Appendix E on page 369 for
	some common services and port numbers.
Protocol	This is the protocol (TCP or UDP) used for the service.
OK	Click OK to save your customized settings.
Cancel	Click Cancel to exit this screen without saving.

17.5.2Rule Configuration: User Defined Service Rule Configuration

If you want to edit a bandwidth management rule for other applications or services, click the Edit icon in the User-defined Service table of the Advanced screen. The following screen displays.

Figure 150 Bandwidth Management Rule Configuration: User-defined Service Rule Configuration

NBG-460N User’s Guide

241