ZyXEL Communications wireless n gigbit router zyxel manual Telnet Screen, FTP Screen, 250

Chapter 18 Remote Management

18.5 Telnet Screen

You can use Telnet to access the NBG-460N’s command line interface. Specify the interface/s from which the NBG-460N can be managed remotely using this service and specify a secure client that can manage the NBG-460N.

To change your NBG-460N’s Telnet settings, click Management > Remote MGMT > Telnet. The following screen displays.

Figure 153 Management > Remote MGMT > Telnet

The following table describes the labels in this screen.

Table 84 Management > Remote MGMT > Telnet

LABEL	DESCRIPTION
Server Port	You may change the server port number for a service if needed, however
	you must use the same port number in order to use that service for
	remote management.
Server Access	Select the interface(s) through which a computer may access the NBG-
	460N using this service.
Secured Client	A secured client is a “trusted” computer that is allowed to communicate
IP Address	with the NBG-460N using this service.
	Select All to allow any computer to access the NBG-460N using this
	service.
	Choose Selected to just allow the computer with the IP address that you
	specify to access the NBG-460N using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

18.6 FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the NBG-460N’s firmware and configuration files. To use this feature, your computer must have an FTP client.

250

NBG-460N User’s Guide