ZyXEL Communications wireless n gigbit router zyxel manual Advanced WAN Screen, 146

Models: wireless n gigbit router zyxel

1 384
Download 384 pages 30.66 Kb
Page 146
Image 146

Chapter 8 WAN

Table 50 Network > WAN > Internet Connection: PPTP Encapsulation

LABEL

DESCRIPTION

First DNS Server

Select From ISP if your ISP dynamically assigns DNS server

Second DNS Server

information (and the NBG-460N's WAN IP address). The field to the

right displays the (read-only) DNS server IP address that the ISP

Third DNS Server

assigns.

 

 

Select User-Definedif you have the IP address of a DNS server.

 

Enter the DNS server's IP address in the field to the right. If you

 

chose User-Defined, but leave the IP address set to 0.0.0.0, User-

 

Defined changes to None after you click Apply. If you set a

 

second choice to User-Defined, and enter the same IP address,

 

the second User-Definedchanges to None after you click Apply.

 

Select None if you do not want to configure DNS servers. If you do

 

not configure a DNS server, you must know the IP address of a

 

computer in order to access it.

 

 

WAN MAC Address

The MAC address section allows users to configure the WAN port's

 

MAC address by either using the NBG-460N’s MAC address, copying

 

the MAC address from a computer on your LAN or manually entering

 

a MAC address.

 

 

Factory default

Select Factory default to use the factory assigned default MAC

 

Address.

 

 

Clone the

Select Clone the computer's MAC address - IP Address and

computer’s MAC

enter the IP address of the computer on the LAN whose MAC you

address

are cloning. Once it is successfully configured, the address will be

 

copied to the rom file (ZyNOS configuration file). It will not change

 

unless you change the setting or upload a different ROM file.

 

 

Set WAN MAC

Select this option and enter the MAC address you want to use.

Address

 

 

 

Apply

Click Apply to save your changes back to the NBG-460N.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

8.5 Advanced WAN Screen

Use this screen to enable Multicast, assign an IPTV Port, allow Windows Networking and enable Auto-bridge.

Note: The four categories shown in this screen are independent of each other.

146

NBG-460N User’s Guide

Page 146
Image 146
ZyXEL Communications wireless n gigbit router zyxel manual Advanced WAN Screen, 146