ZyXEL Communications wireless n gigbit router zyxel manual 273, Sent via e-mail, Smtp

		Chapter 21 Logs
Table 91 Maintenance > Logs > Log Settings
LABEL	DESCRIPTION
Mail Subject	Type a title that you want to be in the subject line of the log e-mail
	message that the NBG-460N sends. Not all NBG-460N models have
	this field.
Send Log To	The NBG-460N sends logs to the e-mail address specified in this field.
	If this field is left blank, the NBG-460N does not send logs via e-mail.
Send Alerts To	Alerts are real-time notifications that are sent as soon as an event,
	such as a DoS attack, system error, or forbidden web access attempt
	occurs. Enter the e-mail address where the alert messages will be
	sent. Alerts include system errors, attacks and attempted access to
	blocked web sites. If this field is left blank, alert messages will not be
	sent via e-mail.
SMTP	SMTP (Simple Mail Transfer Protocol) is the message-exchange
Authentication	standard for the Internet. SMTP enables you to move messages from
	one e-mail server to another.
	Select the check box to activate SMTP authentication. If mail server
	authentication is needed but this feature is disabled, you will not
	receive the e-mail logs.
User Name	Enter the user name (up to 31 characters, usually the user name of a
	mail account).
Password	Enter the password associated with the user name above.
Log Schedule	This drop-down menu is used to configure the frequency of log
	messages being sent as e-mail:
	•	Daily
	•	Weekly
	•	Hourly
	• When Log is Full
	•	None.
	If you select Weekly or Daily, specify a time of day when the e-mail
	should be sent. If you select Weekly, then also specify which day of
	the week the e-mail should be sent. If you select When Log is Full,
	an alert is sent when the log fills up. If you select None, no log
	messages are sent.
Day for Sending	Use the drop down list box to select which day of the week to send
Log	the logs.
Time for Sending	Enter the time of the day in 24-hour format (for example 23:00
Log	equals 11:00 pm) to send the logs.
Clear log after	Select the checkbox to delete all the logs after the NBG-460N sends
sending mail	an e-mail of the logs.
Syslog Logging	The NBG-460N sends a log to an external syslog server.
Active	Click Active to enable syslog logging.
Syslog Server IP	Enter the server name or IP address of the syslog server that will log
Address	the selected categories of logs.
Log Facility	Select a location from the drop down list box. The log facility allows
	you to log the messages to different files in the syslog server. Refer
	to the syslog server manual for more information.
Active Log and Alert

NBG-460N User’s Guide

273