ZyXEL Communications wireless n gigbit router zyxel manual 314, Firmware Features

Chapter 27 Product Specifications and Wall-Mounting Instructions

Table 118 Hardware Features

Distance between the	137 mm
centers of the holes
on the device’s back.
Screw size for wall-	M4 Tap Screw
mounting

Table 119 Firmware Features

FEATURE	DESCRIPTION
Default IP Address	192.168.1.1
Default Subnet Mask	255.255.255.0 (24 bits)
Default Password	1234
DHCP Pool	192.168.1.33 to 192.168.1.64
Wireless Interface	Wireless LAN
Default Wireless SSID	Wireless LAN: ZyXEL
	Wireless LAN when WPS enabled: ZyXEL WPS
Default Wireless IP	Wireless LAN: Same as LAN (192.168.1.1)
Address
Default Wireless Subnet	Wireless LAN: Same as LAN (255.255.255.0)
Mask
Default Wireless DHCP	Wireless LAN: Same as LAN (32 from 192.168.1.33 to
Pool Size	192.168.1.64)
Device Management	Use the Web Configurator to easily configure the rich range of
	features on the NBG-460N.
Wireless Functionality	Allows IEEE 802.11b and/or IEEE 802.11g and/or IEEE 802.11n
	wireless clients to connect to the NBG-460N wirelessly. Enable
	wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC
	filtering to protect your wireless network.

	Note: The NBG-460N may be prone to RF (Radio
	Frequency) interference from other 2.4 GHz devices
	such as microwave ovens, wireless phones,
	Bluetooth enabled devices, and other wireless LANs.
Firmware Upgrade	Download new firmware (when available) from the ZyXEL web
	site and use the Web Configurator, an FTP or a TFTP tool to put
	it on the NBG-460N.
	Note: Only upload firmware for your specific model!
Configuration Backup & Make a copy of the NBG-460N’s configuration and put it back
Restoration	on the NBG-460N later if you decide you want to revert back to
	an earlier configuration.
Network Address	Each computer on your network must have its own unique IP
Translation (NAT)	address. Use NAT to convert a single public IP address to
	multiple private IP addresses for the computers on your
	network.

314

NBG-460N User’s Guide