ZyXEL Communications wireless n gigbit router zyxel WPS Station Screen, Scheduling Screen, 116

Chapter 7 Wireless LAN

7.9 WPS Station Screen

Use this screen when you want to add a wireless station using WPS. To open this screen, click Network > Wireless LAN > WPS Station tab.

Note: Note: After you click Push Button on this screen, you have to press a similar button in the wireless station utility within 2 minutes. To add the second wireless station, you have to press these buttons on both device and the wireless station again after the first 2 minutes.

Figure 83 Network > Wireless LAN > WPS Station

The following table describes the labels in this screen.

Table 39 Network > Wireless LAN > WPS Station

LABEL	DESCRIPTION
Push Button	Use this button when you use the Push Button Configuration method to
	configure wireless stations’s wireless settings. See Section 5.2.1.1 on
	page 68.
	Click this to start WPS-aware wireless station scanning and the wireless
	security information synchronization.
Or input	Use this button when you use the PIN Configuration method to
station’s PIN	configure wireless station’s wireless settings. See Section 5.2.1.2 on
number	page 69.
	Type the same PIN number generated in the wireless station’s utility.
	Then click Start to associate to each other and perform the wireless
	security information synchronization.

7.10 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn

116

NBG-460N User’s Guide