ZyXEL Communications wireless n gigbit router zyxel manual Log Descriptions, 274

Chapter 21 Logs

Table 91 Maintenance > Logs > Log Settings

LABEL	DESCRIPTION
Log	Select the categories of logs that you want to record.
Send Immediate	Select log categories for which you want the NBG-460N to send e-
Alert	mail alerts immediately.
Apply	Click Apply to save your changes.
Reset	Click Reset to begin configuring this screen afresh.

21.6 Technical Reference

The following section contains additional technical information about the NBG- 460N features described in this chapter.

21.6.1 Log Descriptions

This section provides descriptions of example log messages.

Table 92 System Maintenance Logs

LOG MESSAGE	DESCRIPTION
Time calibration is	The router has adjusted its time based on information
successful	from the time server.
Time calibration failed	The router failed to get information from the time
	server.
WAN interface gets IP:%s	A WAN interface got a new IP address from the DHCP,
	PPPoE, PPTP or dial-up server.
DHCP client IP expired	A DHCP client's IP address has expired.
DHCP server assigns%s	The DHCP server assigned an IP address to a client.
Successful WEB login	Someone has logged on to the router's Web
	Configurator interface.
WEB login failed	Someone has failed to log on to the router's Web
	Configurator interface.
Successful TELNET login	Someone has logged on to the router via telnet.
TELNET login failed	Someone has failed to log on to the router via telnet.
Successful FTP login	Someone has logged on to the router via ftp.
FTP login failed	Someone has failed to log on to the router via ftp.
NAT Session Table is Full!	The maximum number of NAT session table entries
	has been exceeded and the table is full.
Starting Connectivity	Starting Connectivity Monitor.
Monitor
Time initialized by Daytime	The router got the time and date from the Daytime
Server	server.

274

NBG-460N User’s Guide