ZyXEL Communications wireless n gigbit router zyxel Using AP + Bridge Mode and WDS, Link Status

Chapter 5 Tutorials

7Check the status of your wireless connection in the screen below. If your wireless connection is weak or you have no connection, see the Troubleshooting section of this User’s Guide.

Figure 44 Link Status

8If your connection is successful, open your Internet browser and enter http:// www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured.

5.2.4Using AP + Bridge Mode and WDS

Note: You need at least one other NBG-460N to form a bridge connection.

The NBG-460N can be used as an access point that can also communicate with other access points (bridge mode).

In the following figure, you want your notebook (B) to be able to open a file located on the File Server. The File Server is connected to another NBG-460N (Y). You can create a bridge connection between Y and your NBG-460N (Z) by configuring both in AP + Bridge mode and entering the MAC addresses of the other NBG-460N in the WDS Setup field.

74

NBG-460N User’s Guide