Chapter 12 Dynamic DNS

Note: If you have a private WAN IP address, then you cannot use Dynamic DNS. You must have a public WAN IP address.

12.4 Dynamic DNS Screen

Use this screen to enable DDNS and configure the DDNS settings on the NBG- 460N.

To change your NBG-460N’s DDNS, click Network > DDNS. The screen appears as shown.

Figure 120 Network > Dynamic DNS

The following table describes the labels in this screen.

Table 61 Network > Dynamic DNS

LABEL

DESCRIPTION

Enable Dynamic

Select this check box to use dynamic DNS.

DNS

 

 

 

Service Provider

Select the name of your Dynamic DNS service provider.

 

 

Dynamic DNS Type

Select the type of service for which you are registered from your

 

Dynamic DNS service provider.

 

 

Host Name

Enter the host name/s in the field provided. You can specify up to

 

two host names in the field separated by a comma (",").

 

 

User Name

Enter your user name.

 

 

Password

Enter the password assigned to you.

 

 

174

NBG-460N User’s Guide

Page 174
Image 174
ZyXEL Communications wireless n gigbit router zyxel manual Dynamic DNS Screen, 174