ZyXEL Communications wireless n gigbit router zyxel manual 110, Mac

Chapter 7 Wireless LAN

To change your NBG-460N’s MAC filter settings, click Network > Wireless LAN > MAC Filter. The screen appears as shown.

Figure 78 Network > Wireless LAN > MAC Filter

The following table describes the labels in this menu.

Table 34 Network > Wireless LAN > MAC Filter

LABEL	DESCRIPTION
Active	Select Yes from the drop down list box to enable MAC address filtering.
Filter Action	Define the filter action for the list of MAC addresses in the MAC Address
	table.
	Select Deny to block access to the NBG-460N, MAC addresses not listed will
	be allowed to access the NBG-460N
	Select Allow to permit access to the NBG-460N, MAC addresses not listed
	will be denied access to the NBG-460N.
Set	This is the index number of the MAC address.
MAC	Enter the MAC addresses of the wireless station that are allowed or denied
Address	access to the NBG-460N in these address fields. Enter the MAC addresses in
	a valid MAC address format, that is, six hexadecimal character pairs, for
	example, 12:34:56:78:9a:bc.
Apply	Click Apply to save your changes back to the NBG-460N.
Reset	Click Reset to reload the previous configuration for this screen.

110

NBG-460N User’s Guide