Chapter 24 Sys Op Mode

24.4 General Screen

Use this screen to select how you want to use your NBG-460N depending on how you connect to the Internet.

Figure 185 Maintenance > Sys OP Mode > General

If you select Router Mode, the following pop-up message window appears.

Figure 186 Maintenance > Sys Op Mode > General: Router

In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet ports have different IP addresses.

The DHCP server on your device is enabled and allocates IP addresses to other devices on your local network.

The LAN IP address of the device on the local network is set to 192.168.1.1.

You can configure the IP address settings on your WAN port. Contact your ISP or system administrator for more information on appropriate settings.

If you select Access Point the following pop-up message window appears.

Figure 187 Maintenance > Sys Op Mode > General: AP

In AP Mode all Ethernet ports have the same IP address.

All ports on the rear panel of the device are LAN ports, including the port labeled WAN. There is no WAN port.

NBG-460N User’s Guide

301

Page 301
Image 301
ZyXEL Communications wireless n gigbit router zyxel manual 301, Maintenance Sys OP Mode General