ZyXEL Communications wireless n gigbit router zyxel manual Wall-mounting Instructions, 317

	Chapter 27 Product Specifications and Wall-Mounting Instructions
Table 121 Standards Supported (continued)
STANDARD	DESCRIPTION
IEEE 802.11x	Port Based Network Access Control.
IEEE 802.11e QoS	IEEE 802.11 e Wireless LAN for Quality of Service
Microsoft PPTP	MS PPTP (Microsoft's implementation of Point to Point Tunneling
	Protocol)
MBM v2	Media Bandwidth Management v2

Wall-mounting Instructions

Do the following to hang your NBG-460N on a wall.

Note: See the Figure 190 on page 318 for the size of screws to use and how far apart to place them.

1Locate a high position on a wall that is free of obstructions. Use a sturdy wall.

2Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix.

Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws.

3Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.

4Make sure the screws are snugly fastened to the wall. They need to hold the weight of the NBG-460N with the connection cables.

5Align the holes on the back of the NBG-460N with the screws on the wall. Hang the NBG-460N on the screws.

Figure 189 Wall-mounting Example

NBG-460N User’s Guide

317