JBL Everything You Need to Know About the RM10 Vocal Monitor

SPECIFICATIONS

	RM10
Description	3-Speaker, 2-way 10" (250mm) vocal monitor
Maximum Recommended Amplifier Power*	175W
Power Handling (Continuous/Peak)	50W/400W
Nominal Impedance	8 Ohms
Sensitivity (2.83V/1m)	92dB
Frequency Response (–3dB)	40Hz – 20kHz
Crossover Frequency	1,700Hz
High-Frequency Transducers	Dual 3" (75mm) cones with high-temperature voice coils
Low-Frequency Transducer	10" (250mm) Cone with high-temperature
	voice coil, shielded
Baffle	Low diffraction, IsoPower™
Ports	Dual FreeFlow™ flared
Network	Straight-Line Signal Path™ (SSP™)
	with left and right high-frequency trim controls
Terminals	Gold-plated, 5-way binding posts
Dimensions (H x W x D)	13-3/16" x 20-7/8" x 9-5/8" (335mm x 530mm x 245mm)
Weight per Speaker	29.7 lb/13.5kg

STEAL THE SHOW.

GO PRO.™

PRO SOUND COMES HOME™

®

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 USA

2, route de Tours, 72500 Chateau du Loir, France 516.255.4JBL (4525) (USA only) www.jbl.com

© 2005 Harman International Industries, Incorporated. All rights reserved.

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

Part No. PRE1986

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours

72500 Chateau du Loir

France

declare in own responsibility that the product described in this owner’s manual is in compliance with technical stan- dards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group International

Chateau du Loir, France 10/05

*The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.

All features and specifications are subject to change without notice. All dimensions include grilles.