1. To prevent electric shock, note the following:

WARNING

Before wiring or inspection, switch power off and wait for more than 10 minutes. Then, confirm the voltage is safe with voltage tester. Otherwise, you may get an electric shock.

Connect the servo amplifier and servo motor to ground.

Any person who is involved in wiring and inspection should be fully competent to do the work.

Do not attempt to wire the servo amplifier and servo motor until they have been installed. Otherwise, you may get an electric shock.

Operate the switches with dry hand to prevent an electric shock.

The cables should not be damaged, stressed, loaded, or pinched. Otherwise, you may get an electric shock.

2. To prevent fire, note the following:

CAUTION

Do not install the servo amplifier, servo motor and regenerative brake resistor on or near combustibles. Otherwise a fire may cause.

When the servo amplifier has become faulty, switch off the main servo amplifier power side. Continuous flow of a large current may cause a fire.

When a regenerative brake resistor is used, use an alarm signal to switch main power off. Otherwise, a regenerative brake transistor fault or the like may overheat the regenerative brake resistor, causing a fire.

3. To prevent injury, note the follow

CAUTION

Only the voltage specified in the Instruction Manual should be applied to each terminal, Otherwise, a burst, damage, etc. may occur.

Connect the terminals correctly to prevent a burst, damage, etc.

Ensure that polarity (, ) is correct. Otherwise, a burst, damage, etc. may occur.

During power-on or for some time after power-off, do not touch or close a parts (cable etc.) to the servo amplifier heat sink, regenerative brake resistor, servo motor, etc. Their temperatures may be high and you may get burnt or a parts may damaged.

A - 2

Page 2 Page 4
Page 3
Image 3
Mitsubishi Electronics MR-J2S- CL specifications To prevent electric shock, note the following
Page 2 Page 4

MR-J2S- CL specifications

Mitsubishi Electronics has long been a pioneer in automation and control technology, and one of its prominent offerings is the MR-J2S-CL servo amplifier. Designed to enhance the performance of servo motors, the MR-J2S-CL is a critical component in various applications, ranging from industrial machinery to robotics.

One of the standout features of the MR-J2S-CL is its high-performance control capabilities. This servo amplifier supports both position and speed control, enabling precise movement and responsiveness in dynamic applications. The MR-J2S-CL boasts a sophisticated control algorithm that ensures superior torque response, making it ideal for applications that require quick and accurate motion control.

The MR-J2S-CL employs advanced features such as the Auto-Tuning function, which automatically adjusts the servo settings to optimize performance for the specific load conditions. This automation simplifies setup processes and reduces downtime, allowing users to quickly configure the system to their needs.

In terms of connectivity, the MR-J2S-CL is equipped with various communication options, including the CC-Link and Mitsubishi's own MELSEC communications. These options facilitate seamless integration with other devices and control systems, enhancing the overall interoperability of factory automation setups.

Another critical aspect of the MR-J2S-CL is its built-in safety features. The amplifier includes functionalities like safe torque off (STO) and overcurrent protection, which contribute to the overall safety of the operation. These safety measures are essential in reducing the risk of accidents in environments where human interaction occurs alongside machinery.

The MR-J2S-CL is designed with durability and reliability in mind. It has a robust construction that is capable of withstanding harsh industrial environments, including high temperatures and dust exposure. This resilience ensures a long service life, reducing maintenance needs and operational costs.

Furthermore, the MR-J2S-CL is compatible with a wide range of Mitsubishi servo motors, making it a versatile choice for various applications. Its comprehensive capabilities, combined with user-friendly interface options, allow for easy programming and monitoring of performance.

In summary, the Mitsubishi Electronics MR-J2S-CL servo amplifier stands out for its high-performance control, advanced safety features, and robust design. It effectively meets the demands of various industrial applications, making it a valuable asset in modern automation and manufacturing environments. With its blend of precision, reliability, and flexibility, the MR-J2S-CL continues to be a preferred choice for engineers and manufacturers alike.
Top Page Image Contents