Mitsubishi Electronics MR-J2S- CL specifications Station setting, 1Station number setting, Point

6. SERVO CONFIGURATION SOFTWARE

6.3 Station setting

Click “System” on the menu bar and click “Station Selection” on the menu.

When the above choices are made, the following window appears:

(1)Station number setting

Choose the station number in the combo box and click the “Station Settings” button to set the station number.

POINT

This setting should be the same as the station number which has been set in the parameter in the servo amplifier used for communication.

(2)Closing of the station setting window

Click the “Close” button to close the window.

6 - 3