Regenerative alarm | Mitsubishi Electronics MR-J2S- CL manual

3. SIGNALS AND WIRING

3.5 Alarm occurrence timing chart

When an alarm has occurred, remove its cause, make sure that the operation CAUTION signal is not being input, ensure safety, and reset the alarm before restarting

operation.

When an alarm occurs in the servo amplifier, the base circuit is shut off and the servo motor is coated to a stop. Switch off the main circuit power supply in the external sequence. To reset the alarm, switch the control circuit power supply from off to on, press the "SET" button on the current alarm screen, or turn the reset (RES) from off to on. However, the alarm cannot be reset unless its cause is removed.

(Note)

Main circuit

control circuit

Power off

Power on

power supply

OFF

Base circuit

OFF

Dynamic brake

Valid

Brake operation

Servo-on

Invalid

(SON)

OFF

Ready

(RD)

OFF

Trouble

(ALM)

OFF

Reset

(RES)

OFF

50ms or more

60ms or more

Alarm occurs.

Remove cause of trouble.

Note. Switch off the main circuit power as soon as an alarm occurs.

(1) Overcurrent, overload 1 or overload 2

If operation is repeated by switching control circuit power off, then on to reset the overcurrent (AL.32), overload 1 (AL.50) or overload 2 (AL.51) alarm after its occurrence, without removing its cause, the servo amplifier and servo motor may become faulty due to temperature rise. Securely remove the cause of the alarm and also allow about 30 minutes for cooling before resuming operation.

(2) Regenerative alarm

If operation is repeated by switching control circuit power off, then on to reset the regenerative (AL.30) alarm after its occurrence, the external regenerative brake resistor will generate heat, resulting in an accident.

(3) Instantaneous power failure

Undervoltage (AL.10) occurs if power is restored after a 60ms or longer power failure of the control power supply or after a drop of the bus voltage to or below 200VDC. If the power failure persists further, the control power switches off. When the power failure is reset in this state, the alarm is reset and the servo motor will start suddenly if the servo-on (SON) is on. To prevent hazard, make up a sequence which will switch off the servo-on (SON) if an alarm occurs.

(4) Incremental system

When an alarm occurs, the home position is lost. When resuming operation after deactivating the alarm, make a home position return.

3 - 18

MR-J2S- CL specifications

Mitsubishi Electronics has long been a pioneer in automation and control technology, and one of its prominent offerings is the MR-J2S-CL servo amplifier. Designed to enhance the performance of servo motors, the MR-J2S-CL is a critical component in various applications, ranging from industrial machinery to robotics.

One of the standout features of the MR-J2S-CL is its high-performance control capabilities. This servo amplifier supports both position and speed control, enabling precise movement and responsiveness in dynamic applications. The MR-J2S-CL boasts a sophisticated control algorithm that ensures superior torque response, making it ideal for applications that require quick and accurate motion control.

The MR-J2S-CL employs advanced features such as the Auto-Tuning function, which automatically adjusts the servo settings to optimize performance for the specific load conditions. This automation simplifies setup processes and reduces downtime, allowing users to quickly configure the system to their needs.

In terms of connectivity, the MR-J2S-CL is equipped with various communication options, including the CC-Link and Mitsubishi's own MELSEC communications. These options facilitate seamless integration with other devices and control systems, enhancing the overall interoperability of factory automation setups.

Another critical aspect of the MR-J2S-CL is its built-in safety features. The amplifier includes functionalities like safe torque off (STO) and overcurrent protection, which contribute to the overall safety of the operation. These safety measures are essential in reducing the risk of accidents in environments where human interaction occurs alongside machinery.

The MR-J2S-CL is designed with durability and reliability in mind. It has a robust construction that is capable of withstanding harsh industrial environments, including high temperatures and dust exposure. This resilience ensures a long service life, reducing maintenance needs and operational costs.

Furthermore, the MR-J2S-CL is compatible with a wide range of Mitsubishi servo motors, making it a versatile choice for various applications. Its comprehensive capabilities, combined with user-friendly interface options, allow for easy programming and monitoring of performance.

In summary, the Mitsubishi Electronics MR-J2S-CL servo amplifier stands out for its high-performance control, advanced safety features, and robust design. It effectively meets the demands of various industrial applications, making it a valuable asset in modern automation and manufacturing environments. With its blend of precision, reliability, and flexibility, the MR-J2S-CL continues to be a preferred choice for engineers and manufacturers alike.

Mitsubishi Electronics MR-J2S- CL Overcurrent, overload 1 or overload, Regenerative alarm

Models: MR-J2S- CL