Mitsubishi Electronics MR-J2S- CL EMC filter, Combination with the servo amplifier, 14

14. OPTIONS AND AUXILIARY EQUIPMENT

14.2.8 EMC filter

For compliance with the EMC Directive of the EN Standard, it is recommended to use the following filter: Some EMC filters are large in leakage current.

(1) Combination with the servo amplifier

Servo amplifier

Recommended filter

Model Leakage current [mA]

Weight [kg]([lb])

MR-J2S-10CL to MR-J2S-100CL	SF1252	38	0.75 (1.65)
MR-J2S-10CL1 to MR-J2S-40CL1
MR-J2S-200CL MR-J2S-350CL	SF1253	57	1.37 (1.65)
MR-J2S-500CL	(Note) HF-3040A-TM	1.5	5.5 (12.13)
MR-J2S-700CL	(Note) HF-3050A-TM	1.5	6.7 (14.77)

Note : Soshin Electric. A surge protector is separately required to use any of these EMC filters. (Refer to the EMC Installation Guidelines.)

(2) Connection example

						EMC filter			Servo amplifier
(Note 1) Power supply	NFB		LINE			L1	L1	LOAD		L1
3-phase
200 to 230V AC,						L2	L2			L2
1-phase						L3	L3			L3
230VAC or
1-phase		(No		te	2)					L11
100 to120VAC
										L21

Note: 1. For 1-phase 230VAC power supply, connect the power supply to L1,L2 and leave L3 open.

There is no L3 for 1-phase 100 to 120VAC power supply.

2.Connect when the power supply has earth.

(3)Outline drawing

SF1252					SF1253				[Unit: mm(in)]
	149.5(5.886)			6.0(0.236)		209.5(8.248)			6.0(0.236)
		L1		LINE			L1		LINE
		L2					L2
		L3		(input side)			L3		(input side)
168.0(6.614)	LABEL	LOADLINE	156.0(6.142) 140.0(5.512)	LOAD	168.0(6.614)	LABEL	LOADLINE	156.0(6.142) 140.0(5.512)	LOAD
		L2'					L2'
		L1'					L1'
		L3'		(output side)			L3'		(output side)
			8.5	16.0(0.63)				8.5	23.0(0.906)
		(0.335)		42.0			(0.335)		49.0
				(1.654)					(1.929)

14 - 41